ASME BPVC.II.B-2021

2021 ASME Boiler and Pressure Vessel Code, Section II: Materials - Part B: Nonferrous Material Specifications

STANDARD by ASME International, 07/01/2021

ISBN(s):9780791874059

Number of Pages:1276

Product Scope / Abstract

This Section is a "Service Section" to the other BPVC Sections, providing material specifications for ferrous materials adequate for safety in the field of pressure equipment. These specifications contain requirements for chemical and mechanical properties, heat treatment, manufacture, heat and product analyses, and methods of testing. They are designated by SB numbers and are identical with or similar to those of specifications published by ASTM and other recognized national or international organizations.

Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes.

Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities.

TABLE OF CONTENTS

List of Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Statement of Policy on the Use of the ASME Single Certification Mark and Code Authorization in Advertising xiii

Statement of Policy on the Use of ASME Marking to Identify Manufactured Items . . . . . . . . . . . . . . . . . . . . . . xiii

Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees . . . . . . . . . . . . . . . xiv

Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii

ASTM Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxviii

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxix

Specifications Listed by Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xl

Specification Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xlv

Summary of Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xlvi

List of Changes in Record Number Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l

Cross-Referencing and Stylistic Changes in the Boiler and Pressure Vessel Code . . . . . . . . . . . . . . . . . . . . . . . li

SB-26/SB-26M Specification for Aluminum-Alloy Sand Castings . . . . . . . . . . . . . . . . . . . . . . . 1

SB-42 Specification for Seamless Copper Pipe, Standard Sizes . . . . . . . . . . . . . . . . . 15

SB-43 Specification for Seamless Red Brass Pipe, Standard Sizes . . . . . . . . . . . . . . 23

SB-61 Specification for Steam or Valve Bronze Castings . . . . . . . . . . . . . . . . . . . . . . 31

SB-62 Specification for Composition Bronze or Ounce Metal Castings . . . . . . . . . . 35

SB-75/SB-75M Specification for Seamless Copper Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

SB-96/SB-96M Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for

General Purposes and Pressure Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

SB-98/SB-98M Specification for Copper-Silicon Alloy Rod, Bar and Shapes . . . . . . . . . . . . . 55

SB-108/SB-108M Specification for Aluminum-Alloy Permanent Mold Castings . . . . . . . . . . . . . 61

SB-111/SB-111M Specification for Copper and Copper-Alloy Seamless Condenser Tubes and

Ferrule Stock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

SB-127 Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip 93

SB-135/SB-135M Specification for Seamless Brass Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

SB-148 Specification for Aluminum-Bronze Sand Castings . . . . . . . . . . . . . . . . . . . . . 113

SB-150/SB-150M Specification for Aluminum Bronze Rod, Bar, and Shapes . . . . . . . . . . . . . . . 119

SB-151/SB-151M Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel

Rod and Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

SB-152/SB-152M Specification for Copper Sheet, Strip, Plate, and Rolled Bar . . . . . . . . . . . . . 133

SB-160 Specification for Nickel Rod and Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

SB-161 Specification for Nickel Seamless Pipe and Tube . . . . . . . . . . . . . . . . . . . . . . 151

SB-162 Specification for Nickel Plate, Sheet, and Strip . . . . . . . . . . . . . . . . . . . . . . . . 157

SB-163 Specification for Seamless Nickel and Nickel Alloy Condenser and

Heat-Exchanger Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173

SB-164 Specification for Nickel-Copper Alloy Rod, Bar, and Wire . . . . . . . . . . . . . . . 187

SB-165 Specification for Nickel-Copper Alloy (UNS N04400) Seamless Pipe and

Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201

SB-166 Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601,

N06603, N06690, N06693, N06025, N06045, and N06696) and Nickel

Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron

Chromium-Tungsten Alloy (UNS N06674) Rod, Bar, and Wire . . . . . . . . . 207

SB-167 Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601,

N06603, N06690, N06693, N06025, N06045, and N06696), and Nickel

Chromium-Cobalt-Molybdenum Alloy (UNS N06617) and Nickel-Iron

Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube . . . . . 217

iiiSB-168 Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601,

N06603, N06690, N06693, N06025, N06045, and N06696) and Nickel

Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron

Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, and Strip . . . . . . . 227

SB-169/SB-169M Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar . . . . . . . . . 241

SB-171/SB-171M Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Con

densers, and Heat Exchangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247

SB-187/SB-187M Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod,

Bar, and Shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255

SB-209 Specification for Aluminum and Aluminum-Alloy Sheet and Plate . . . . . . . . 265

SB-210 Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes . 291

SB-211 Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar,

Rod, and Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303

SB-221 Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire,

Profiles, and Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313

SB-234 Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for

Condensers and Heat Exchangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329

SB-241/SB-241M Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless

Extruded Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337

SB-247 Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forg

ings, and Rolled Ring Forgings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357

SB-248 Specification for General Requirements for Wrought Copper and Copper

Alloy Plate, Sheet, Strip, and Rolled Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375

SB-249/SB-249M Specification for General Requirements for Wrought Copper and Copper

Alloy Rod, Bar, Shapes, and Forgings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389

SB-251 Specification for General Requirements for Wrought Seamless Copper and

Copper-Alloy Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403

SB-265 Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate . . . . . 411

SB-271/SB-271M Specification for Copper-Base Alloy Centrifugal Castings . . . . . . . . . . . . . . . . 425

SB-283/SB-283M Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed) . . . 433

SB-308/SB-308M Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles . . . 447

SB-315 Specification for Seamless Copper Alloy Pipe and Tube . . . . . . . . . . . . . . . . . 453

SB-333 Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip . . . . . . . 465

SB-335 Specification for Nickel-Molybdenum Alloy Rod . . . . . . . . . . . . . . . . . . . . . . . 469

SB-338 Specification for Seamless and Welded Titanium and Titanium Alloy Tubes

for Condensers and Heat Exchangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475

SB-348/SB-348M Specification for Titanium and Titanium Alloy Bars and Billets . . . . . . . . . . 485

SB-359/SB-359M Specification for Copper and Copper-Alloy Seamless Condenser and Heat

Exchanger Tubes with Integral Fins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495

SB-363 Specification for Seamless and Welded Unalloyed Titanium and Titanium

Alloy Welding Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 507

SB-366/SB-366M Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings . . 513

SB-367 Specification for Titanium and Titanium Alloy Castings . . . . . . . . . . . . . . . . . 523

SB-369 Specification for Copper-Nickel Alloy Castings . . . . . . . . . . . . . . . . . . . . . . . . 531

SB-381 Specification for Titanium and Titanium Alloy Forgings . . . . . . . . . . . . . . . . 537

SB-395/SB-395M Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger

and Condenser Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 547

SB-407 Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube . . . 559

SB-408 Specification for Nickel-Iron-Chromium Alloy Rod and Bar . . . . . . . . . . . . . 565

SB-409 Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip . . . . . 571

SB-423 Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS

N08825 and N08221) Seamless Pipe and Tube . . . . . . . . . . . . . . . . . . . . . 577

SB-424 Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS

N06845) Plate, Sheet, and Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 583

SB-425 Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod

and Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 589

ivSB-434 Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003,

UNS N10242) Plate, Sheet, and Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 597

SB-435 Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556

Plate, Sheet, and Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601

SB-443 Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS

N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)

Plate, Sheet, and Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605

SB-444 Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS

N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon

Alloy (UNS N06219) Pipe and Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 617

SB-446 Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS

N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219),

and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod <

Write a review

Note: HTML is not translated!
    Bad           Good

ASME BPVC.II.B-2021

  • Product Code: ASME BPVC.II.B-2021pdf
  • Availability: In Stock
  • $820.00
  • $360.00


Related Products

ASME BPVC.II-2021 SET METRIC

ASME BPVC.II-2021 SET METRIC

ASME BPVC.II-2021 SET METRIC2021 ASME Boiler & Pressure Vessel Code - Section II - Materials - C..

$1,300.00 $3,400.00

ASME BPVC.II-2021 SET CUSTOMARY

ASME BPVC.II-2021 SET CUSTOMARY

ASME BPVC.II-2021 SET CUSTOMARY2021 ASME Boiler & Pressure Vessel Code - Section II - Materials ..

$1,300.00 $3,400.00